Software Downloads The following software is available for download from this website. If the file you need is not shown here, contact us directly. EF Panel Software - zip file, 193 kb Although we now recommend using Conference Composer to control your EF200 or EF1210, this software is still available. It allows you to remotely control your EF200 or EF1210 through an RS232 port using your PC or laptop. For the EF200, it allows you to control (disable, enable, increase gain, etc) most if not all features of the phone add. For the EF1210, you can not only control different features of the 1210, but you can also do set up and save the configuration to non-volatile memory. You can also control the EF200 AND/or the EF1210 or multiples in any combination by using the ASPIBus. The units need to be daisy chained together through the ASPIBus using Category 5 cable. Crestron control macros for EF1210 - zip file, 194 KB. These macros allow you to operate the EF1210 using a Crestron control panel. Crestron control macros for EF200 - zip file, 203 KB. These macros are used for controlling an EF200 with a Crestron panel. AMX control codes for EF1210 - Proprietary AMX code, 60 KB. This code will assist you in setting up Panja control of the EF1210. AMX control codes for the EF200 - Proprietary AMX code, 73 KB. This code will support both single EF200 units as well as multiple units linked through the ASPI bus. Back to Main Page | Contact Us Products | Technical Resources Polycom Installed Voice Business Group 1720 Peachtree St NW, Suite 220 Atlanta,GA 30309 telephone: 404.892.3200 fax: 404.892.2512 e-mail us